contact ring
英 [ˈkɒntækt rɪŋ]
美 [ˈkɑːntækt rɪŋ]
网络 接触环
双语例句
- The utility model relates to a motorcycle handle switch device which comprises a switch casing, a driving shaft, a contact ring, a contact sheet, a spring, a base plate and a wire.
一种摩托车手柄开关装置，包括开关壳体、传动轴、接触环、接触片、弹簧、基板以及配线。 - Finite Element Analysis of Stress and Contact Pressure of Rubber O-sealing Ring with Back-up Ring
O形橡胶密封圈配合挡圈密封的应力与接触压力有限元分析 - Clean contact surface for retaining ring on the transmission.
清洁变速器的扣环接触面。 - The style of main part furnace was outer cycle, and some parts of calciner were optimized, such as setting outlet valve in end of the furnace, enlarging contact area between ring and serving wheel, installing three rows of heating pipes with wings in the furnace.
煅烧炉型为外返式，并对炉体局部进行了优化：炉尾设出料阀，加大滚圈与托轮的接触面积，炉内设置三排带翅片的加热管。 - To make up for these shortages a new type traveling wave piezoelectric motor with cylinder stator is presented, which features the cylindrical stator and the line contact instead of the traditional ring or disc type and the point contact.
针对这些不足提出一种新型行波柱面驱动压电电动机，将传统的点接触改进成现在的线接触，即环型或圆盘型定子改进成圆柱型定子。 - Under the state of equivalent maximum stress, the contact friction condition of metal belt and pulley was simulated by the contact of ring and block in Timken Friction Test Machine.
以接触应力相等为等效的接触状态，采用环块摩擦实验机模拟的方法，对汽车无级自动变速器CVT带轮和钢带的接触条件进行了模拟。 - It is assumed that the plate is in close contact with the ring without initial stresses. Stress functions of the plate and the ring are formed by a complex Laurent series.
假设板与环间处于无初应力的紧密接触状态，弹性板和弹性环的应力函数都可按复劳伦级数展开。 - The point of the most normal pressure was analyzed in the contact points between the adjustable ring and the planet cone.
分析出了调速环和行星锥的接触点为行星锥上正压力最大的点。 - FEM Analysis of 3 D Contact Problem in Rubber Sealing Ring
橡胶密封圈三维接触问题的有限元分析 - As a new material, the alloy has found its extensive use in electronics industry and electrical equipment in recent years for the electric contact plate, contact ring, clamping part etc.
近年来该合金作为一种新材料被广泛地用于制作电子工业、电器设备上的电极触头板、接触环、夹持体等零件。 - Based on the fact of the screwfeed of the blank during the rotary-forging, the paper offers a numerical calculate process for the contact zone outline of the ring parts and provides an exact method of calculation for the contact area.
本文从摆动辗压过程中坯料螺旋式送进的事实出发，给出了环形坯料接触区域轮廓坐标的数值求解过程，为正确计算接触面积提供了精确的计算方法。 - On the contact stress of the riding ring in a revolving dry cylinder
回转干燥筒托轮滚圈接触应力的研究 - The Influence of the Contact Sections Between a Piston Ring and a Cylinder Liner to the Temperature Distribution of the Ring
活塞环与气缸接触面对活塞环温度分布的影响 - After the rubber ring is a little compressed, another sealing is formed with the metal ring to contact the set ring, which bears the whole pressure on the whole disc.
在环形橡胶密封圈被稍微压缩后，阀板上的环形金属密封圈再与阀座接触又形成一道密封并承受整个启闭件上的压力； - A combined problem with frictional contact between a rubber ring with large deformation and linear elastic thin plate is solved by means of the substructuring technique. A study of the influence of frictional coefficient and the influence of plate thickness is presented.
本文借助于子结构技术解决了大变形橡皮环和弹性薄极具有摩擦的接触问题，研究了摩擦系数、极厚对橡皮环变形的影响。 - Based on the additional decomposition theorem of deformation gradient ( i. e. S-R theorem) and co-moving coordinate technique, a typical nonlinear mechanical problem, contact large deformation of rubber ring radially compressed, was computed by FEM.
本文基于变形梯度和分解定理（S-R定理）和拖带坐标描述法，应用有限元方法，计算了橡胶环直径方向受压接触大变形问题。 - This paper introduced a contact model of piston ring and cylinder liner.
本文以机车柴油机为对象，建立活塞环-气缸接触模型。 - Finite Element Analysis for the Contact Problem of Check Ring Joint Structure in Underwater Skirt Pile Gripper
水下夹桩器卡环连接结构接触有限元分析 - Wear-self-compensation repairing effects of two kinds of SRT as additive in lubricating oil was evaluated by the plane/ plane contact of the ring/ ring rubbing pairs.
用环/环面接触试验考察了所合成的两种物质作为润滑油添加剂的磨损自补偿修复效应。 - Characteristics of Contact and Wear between Spinning Ring and Traveller
钢领与钢丝圈之间的摩擦及磨损性质 - Analyzing Contact Pressure of Rubber Sealing Ring by Geometric Non-linear Finite Element Method
用几何非线性有限元法分析橡胶密封圈的接触压力 - Pressure distributions of the contact zone of a ring workpiece in rotary forging
环形件摆动辗压接触区域的压力分布 - The mathematical models of contact pressure distribution between rolling ring and shell under intermittent contact are set up, the formulae of bending moment and bending stress of tyre are obtained.
建立了非连续接触下筒体-滚圈接触压力的计算模型，得出了滚圈弯矩及弯曲应力计算公式。 - Design Practice of Metallic Contact Seal of Piston Ring Type
金属涨圈接触式密封设计实践 - Contact analysis of seal ring on new pressure vessel flanges
新型压力容器法兰密封结构的有限元接触分析 - In the establishment of three-dimensional finite element model, the paper considers the wind turbine load transfer mode, the non-linear contact between the metal ring and concrete, as well as discrete reinforcement model, and calculates by using elastic materials and elastic-plastic material model.
在建立有限元三维模型时，考虑风机荷载传递方式，金属环与混凝土之间和基础与地基之间的非线性接触，以及离散的钢筋模型，分别采用线性材料和非线性材料模型进行计算。 - Accidents of spring break caused by contact fatigue between bracing ring and effective coil of the axle box ring are very common, and the influence factors of contact fatigue are very complicated. However, relevant research is very few at home and aboard.
轴箱弹簧支撑圈与有效圈之间的接触疲劳造成弹簧断裂的事故并不少见，接触疲劳的影响因素是复杂的，而针对轴箱弹簧接触疲劳的研究在国内外均比较少。 - The thesis has developed two key technologies of cultivating vessel conducted in-depth study with ANSYS finite element analysis. First, the contact pressure distribution of the supporting ring structure was researched and analyzed; triangular distribution of contact stress distribution is more realistic conclusions.
论文结合ANSYS有限元分析方法对培养釜的两项关键技术进行了深入研究。首先研究分析了支撑环结构的接触压力分布，得出了三角形分布更为符合实际接触应力分布的结论。 - The basic theories of rolling research, including the Hertz contact theory and rigid ring hypothesis, are introduced.
阐述了滚动轴承研究分析中相关的基础理论，主要包括Hertz接触弹性理论和刚性套圈假设理论。